How to remove a garbage disposal knockout plug

They can usually be found in the same aisle as the garbage disposal units. Your other option is to buy a brand new one. You can use the cord and plug that is installed in your old unit simply by removing it from the previous garbage disposal and reinstalling it into your new one. Most new disposals will not come with a cord and plug to power it up once your new unit is installed. Of course, youвЂ™ll need a brand new garbage disposal unit for this job! The type of unit you choose to purchase is up to you and your daily disposal needs. If the tube is too short, youвЂ™ll have to make a store run to buy a new tube. If the tube is too long, you can use a hacksaw to cut it down to the appropriate length. If youвЂ™re using your old discharge tube with your new garbage disposal unit, chances are that it will not be the right length. YouвЂ™ll be able to start this tightening process by hand, but the final few rotations will require lots of force which can only be achieved with pliers. This ensures a tight fit between the disposal and the sink flange. When you hang the new garbage disposal unit, youвЂ™ll need a sturdy pair of tongue-in-groove pliers to rotate the lower mounting rings.

Some units will come with this tool bent at the appropriate angle to get this job done, but if it doesnвЂ™t, youвЂ™ll be able to find a hex wrench (or use an Allen wrench) to get this part of the job done. You might need a hex wrench to turn the motor of your current garbage disposal by hand when checking for any objects that could be jamming it up. ThatвЂ™s because its head fits more seamlessly between the ring and flange, making easy work of getting the old ring to pop out. YouвЂ™ll need a thin blade screwdriver to remove the old snap ring from the sink. Then you can simply remove the knockout from the inside disposal with your hands. When you remove your new garbage disposal from the box, be sure to remove the plastic knockout with a screwdriver and a hammer. Compared to other types of PlumberвЂ™s Putty, it is harder to remove, but thatвЂ™s why it works so well to keep your flange tightly sealed! Screwdriver and HammerДЄ screwdriver and hammer will come in handy when removing the dishwasher knockout from before you hang your new garbage disposal unit. Silicone lasts longer, ensuring there will be no leakage in the flange. We recommend silicone sealant as it is more reliable for a job of this nature. Silicone sealant, also known as вЂњ PlumberвЂ™s Putty,вЂќ will be needed to seal the area between the sink flange and the sink.

Tools and Materials You Will Need Silicone or PlumberвЂ™s Putty Where Is the Reset Button on My Garbage Disposal?.Do You Have to Run Water When Using a Garbage Disposal?.What Items Can You Put In a Garbage Disposal?.Step 7: Tighten the New Disposal to the Sink Flange.Step 4: Support the Weight of the Old Unit Before Removing It.Step 3: Remove the Knockout and Attach the Cord and Plug.Step 2: Gather Your Tools/Materials and Get to Know Your New Unit.Step 1: Make Sure Your Old Unit Is Actually Broken.Step-By-Step Guide for Installing a New Garbage Disposal Unit.

How to remove a garbage disposal knockout plug